Publications of the HPC²
Publications by HPC centers and institutes include items from past years such as an early publication written by one of the HPC founding investigators, Dr. Joe Thompson. Numerical Grid Generation was originally published by Elsevier Science Publishing Co., Inc. in 1985, and the copyright was transferred to Joe F. Thompson in 1997.
Publications for: Thompson
Yadollahi, A., Shamsaei, N., Thompson, S.M., Elwany, A., & Bian, L. (2016). Effects of Building Orientation and Heat Treatment on Fatigue Behavior of Selective Laser Melted 17-4 PH Stainless Steel. International Journal of Fatigue. Elsevier. 1, 1. DOI:10.1016/j.ijfatigue.2016.03.014.
Aboutaleb, A., Bian, L., Elwany, A., Shamsaei, N., Thompson, S.M., & Tapia, G. (2016). Accelerated Process Optimization for Laser-Based Additive Manufacturing by Leveraging Similar Prior Studies. IIE Transactions. Taylor & Francis. 1, 1. DOI:10.1080/0740817X.2016.1189629.
Yadollahi, A., Simsiriwong, J., Thompson, S.M., & Shamsaei, N. (2016). Data Demonstrating the Effects of Build Orientation and Heat Treatment on Fatigue Behavior of Selective Laser Melted 17-4 PH Stainless Steel. Data in Brief. Elsevier. 7, 89-92. DOI:10.1016/j.dib.2016.02.013.
Marufuzzaman, M., Thompson, S.M., Shamsaei, N., & Bian, L. (2016). Additive Manufacturing of Biomedical Implants: A Feasibility Assessment via Supply-Chain Cost Analysis. Additive Manufacturing. Elsevier. 11, 97-113. DOI:10.1016/j.addma.2016.04.006.
Shamsaei, N., & Thompson, S.M. (2016). Data Indicating Temperature Response of Ti-6Al-4V Thin-Walled Structure during Its Additive Manufacture via Laser Engineered Net Shaping. Data in Brief. Elsevier. 7, 697-703. DOI:10.1016/j.dib.2016.02.084.
Mahmoudi, M., Yadollahi, A., Elwany, A., Shamsaei, N., Thompson, S.M., & Bian, L. (2016). Mechanical Properties and Microstructural Characterization of Selective Laser Melted 17-4 PH Stainless Steel. Rapid Prototyping. Emerald Light. 1, 1. DOI:10.1108/RPJ-12-2015-0192.
Sterling, A. J., Shamsaei, N., Thompson, S.M. (2016). Fatigue Behavior and Failure Mechanisms of Direct Laser Deposited Ti-6Al-4V. Materials Science & Engineering A. Elsevier. 655, 100-112. DOI:10.1016/j.msea.2015.12.026. [Abstract]
Sterling, A. J., Shamsaei, N., & Thompson, S.M. (2016). Data Related to the Fatigue Behavior and Failure Mechanisms of Direct Laser Deposited Ti-6Al-4V with and without Heat Treatment. Data in Brief. Elsevier. 6(March), 970-973. DOI:10.1016/j.dib.2016.01.059. [Abstract]
Thompson, S.M., Shamsaei, N., Daniewicz, S., & Shao, S. (2016). Understanding the Microstructure Formation of Ti-6Al-4V during Direct Laser Deposition via In-Situ Thermal Monitoring. JOM. TMS. 68(3), 778-790. DOI:10.1007/s11837-015-1767-z. [Abstract]
Lu, H., Thompson, S.M., Laun, F. F., & Ma, H. B. (2016). Effect of Cooling Rate on Thermal Performance of an Oscillating Heat Spreader. Journal of Thermophysics and Heat Transfee. AIAA. 30(2), 461-465. DOI:10.2514/1.T4753..
Peer-Reviewed Conference Papers
Zhang, L., Laramee, R., Sescu, A., Thompson, D., & Chen, G. (2016). Flow Visualization Based on a Derived Rotation Field. Proceedings of Visualization and Data Analysis (VDA) 2016. San Francisco, CA.
Non-Refereed Conference Papers
Sescu, A., Taoudi, L., Afsar, M., & Thompson, D. (2016). Control of Gortler Vortices by Means of Staggered Surface Streaks. AIAA Aviation 2016, June 13-17, Paper 2016-3950. Washington, DC.
Blake, J., & Thompson, D. (2016). Toward Simulating a Pitch-Up Maneuver for a Small Unmanned Aerial Vehicle. AIAA Aviation 2016, June 13-17, Paper 2016-4338. Washington, DC.
News | Events | Jobs | Intranet (Restricted access)
Mississippi State University is an equal opportunity institution.