Skip to:

refine icon Refine Search
refine icon Refine Search
Publications for: Omid Askari (Omid)
Peer-Reviewed Journals
Forghan, F., Askari, O., Narusawa, U., & Metghalchi, H. (2017). Cooling of Turbine Blades With Expanded Exit Holes: Computational Analyses of Leading Edge and Pressure-Side of a Turbine Blade. Journal of Energy Resources Technology. 139(4), 042004. [Abstract] [Document Site]
Yu, G., Askari, O., Hadi, F., Wang, Z., Metghalchi, H., Kannaiyan, K., & Sadr, R. (2017). Theoretical Prediction of Laminar Burning Speed and Ignition Delay Time of Gas-to-Liquid Fuel. Journal of Energy Resources Technology. 139(2), 022202. [Abstract] [Document Site]
Askari, O., Elia, M., Ferrari, M., & Metghalchi, H. (2017). Cell Formation Effects on the Burning Speeds and Flame Front Area of Synthetic Gas at High Pressures and Temperatures. Applied Energy. 189, 568-577. [Abstract] [Document Site]
Askari, O., Wang, Z., Vien, K., Sirio, M., & Metghalchi, H. (2017). On the Flame Stability and Laminar Burning Speeds of Syngas/O2/He Premixed Flame. Journal of Fuel. 190, 90-103. [Abstract] [Document Site]
Askari, O., Elia, M., Ferrari, M., & Metghalchi, H. (2017). Auto-Ignition Characteristics Study of Gas-to-Liquid Fuel at High Pressures and Low Temperatures. Journal of Energy Resources Technology. 139(1), 012204. [Abstract] [Document Site]
Pedros, P. B., Askari, O., & Metghalchi, H. (2016). Reduction of Nitrous Oxide Emissions from Biological Nutrient Removal Processes by Thermal Decomposition. Journal of Water Research. 106, 304-311. DOI:10.1016/j.watres.2016.10.007. [Abstract] [Document Site]
Askari, O., Vien, K., Wang, Z., Sirio, M., & Metghalchi, H. (2016). Exhaust Gas Recirculation Effects on Flame Structure and Laminar Burning Speeds of H2/CO/air Flames at High Pressures and Temperatures. Journal of Applied Energy. 179, 451–462. DOI:10.1016/j.apenergy.2016.06.118. [Abstract] [Document Site]
Peer-Reviewed Conference Papers
Yu, G., Askari, O., & Metghalchi, H. (2017). Theoretical Prediction of the Effect of Blending JP8 with Syngas on the Ignition Delay Time and Laminar Burning Speed. Proceedings of ECOS 2017 - The 30th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems. San Diego, CA. [Abstract]
Yu, G., Metghalchi, H., & Askari, O. (2017). Combustion Simulation of Propane/Air Mixtures Using Rate-Controlled Constrained-Equilibrium. 10th U. S. National Combustion Meeting Organized by the Eastern States Section of the Combustion Institute. College Park, MD. [Abstract]
Yu, G., Askari, O., Hadi, F., Wang, Z., Metghalchi, H., Kannaiyan, K., & Sadr, R. (2016). Theoretical Prediction of Laminar Burning Speed and Ignition Delay of Gas to Liquid Fuel. International Mechanical Engineering Congress and Exposition, IMECE2016. Phoenix, AZ. [Abstract]
Elia, M., Ferrari, M., Askari, O., & Metghalchi, H. (2016). Mass Burning Rate of Syngas/air Mixtures and Gas-to-liquid Fuel Auto-ignition at High Temperatures and Pressures. International Mechanical Engineering Congress and Exposition, IMECE2016. Phoenix, AZ. [Abstract]
Askari, O., Vien, K., Wang, Z., & Metghalchi, H. (2016). Laminar Burning Speed and Flame Structure of Syngas/oxygen/helium and Syngas/air/EDG Premixed Flame. 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, HEFAT2016. Costa del sol, Spain. [Abstract]
Askari, O., Vien, K., Wang, Z., & Metghalchi, H. (2016). The Effect of Diluent on Flame Structure and Laminar Burning Speeds of H2/CO/oxidizer/diluent. Spring Technical Meeting Eastern States Section of the Combustion Institute. Princeton, NJ. [Abstract]
Peer-Reviewed Conference Posters
Askari, O. (2017). Calculation of Thermal Plasma Thermodynamic Properties for Arbitrary Gas Mixtures. International Mechanical Engineering Congress and Exposition. Tampa, FL. [Abstract]