Carey, A. S., Burcham, M. N.,
Hammi, Y., Moser, R., Scott, D. A., Seely, D. W.,
Howard, I. L., & Horstemeyer, M. (2020). Instrumented Characterization of Ultra-High Performance Concrete.
Construction Materials.
Ahead of Print, 1-12.
DOI:10.1680/jcoma.19.00088.
Sterling, A. J., Torries, B. A., Shamsaei, N., Thompson, S.M., & Seely, D. W. (2016). Fatigue Behavior and Failure Mechanisms of Direct Laser Deposited Ti-6Al-4V.
Materials Science & Engineering A. Elsevier.
655, 100-112.
DOI:10.1016/j.msea.2015.12.026. [
Abstract]
Yadollahi, A., Shamsaei, N., Thompson, S.M., & Seely, D. W. (2015). Effects of Process Time Interval on the Mechanical and Microstructural Properties of Direct Laser Deposited 316L Stainless Steel.
Materials Science and Engineering: A. Elsevier.
644, 171-183.
DOI:10.1016/j.msea.2015.07.056. [
Abstract]
Yadollahi, A., Shamsaei, N., Thompson, S.M., & Seely, D. W. (2015). Effects of Process Time Interval and Heat Treatment on the Mechanical and Microstructural Properties of Direct Laser Deposited 316L Stainless Steel. Materials Science and Engineering: A. 644, 171–183.
Song, W., Martin, H. J., Hicks, A., Seely, D. W., Walton, C. A., Lawrimore, W. B., Wang, P., & Horstemeyer, M. (2013). Corrosion Behaviour of Extruded AM30 Magnesium Alloy under Salt-Spray and Immersion Environments. Corrosion Science. El Sevier. 78(1), 353-368.
Francis, D.K., Deang, J., Florea, R. S., Gaston, D. R., Lee, N., Nouranian, S., Permann, C., Rudd, J., Seely, D. W.,
Whittington, W. R., & Horstemeyer, M. (2012). Characterization and Failure Analysis of a Polymeric Clamp Hanger Component.
Engineering Failure Analysis.
26, 230-239.
DOI:10.1016/j.engfailanal.2012.07.020. [
Abstract] [
Document Site]
Bagheri, M. A., Seely, D. W., Shamsaei, N., & Thompson, S.M. (2015). Microstructure Evaluation of Ti-6Al-4V Fabricated by Additive Manufacturing Process.
TMS 2015 144th Annual Meeting & Exhibition. Orlando, FL: TMS. [
Abstract]
Yadollahi, A., Shamsaei, N., Thompson, S.M.,
Bian, L., & Seely, D. W. (2015). Microstructural Features and Mechanical Properties of 316L Stainless Steel Fabricated by Laser Additive Manufacture.
56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials. Kissimmee, FL.
Yadollahi, A., Seely, D. W., Patton, B., Shamsaei, N., & Thompson, S.M. (2015). Mechanical and Microstructural Properties of LENS-Produced AISI 316L Stainless Steel.
56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Kissimmee, FL: AIAA.
DOI:10.2514/6.2015-1355.
Marshall, G., Young, W. J., II, Thompson, S.M., Seely, D. W., & Shamsaei, N. (2015). Effect of Substrate Thickness on Micro-Hardness of Direct Laser Deposited Ti-6Al-4V Parts.
56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Kissimmee, FL: AIAA.
DOI:10.2514/6.2015-1356.
Seely, D. W.,
Rhee, H., & Horstemeyer, M. (2018). : The Effect of Heat Treatment on the Microstructure of a LENS Titanium Aluminum Vanadium Alloy Functionally Graded with Boron.
Proceedings of Material Science & Technology 2018. Columbus, OH. [
Abstract]