Kluss, J. V., Rostaghi, M., Whittington, W. R., Rhee, H., Whittington, S. P., & Yadollahi, A. (2019). Porcelain Insulation - Defining the Underlying Mechanism of Failure. High Voltage. 4(2), 81-88.

Khanzadeh, M., Tian, W., Yadollahi, A., Doude, H., Tschopp, M. A., & Bian, L. (2018). Dual Process Monitoring of Metal-based Additive Manufacturing Using Tensor Decomposition of Thermal Image Streams. Additive Manufacturing. 23, 443-456.

Mahtabi, M. J., Yadollahi, A., Rahmati, M., & Stone, T.W. (2018). Correlation Between Hardness and Loading Transformation Stress of Superelastic NiTi. Arabian Journal for Science and Engineering. Berlin Heidelberg: Springer. 1, 1-5. DOI:10.1007/s13369-018-3217-z. [Abstract]

Yadollahi, A., Mahtabi, M. J., Khalili, A., Doude, H., & Newman, J., Jr. (2018). Fatigue-Life Prediction of Additively Manufactured Material: Effects of Surface Roughness, Defect Size and Shape. International Journal of Fatigue. Online, Online.

Yadollahi, A., & Shamsaei, N. (2017). Additive Manufacturing of Fatigue Resistant Materials: Challenges and Opportunities. International Journal of Fatigue. 98, 14-31.

Mahmoudi, M., Elwany, A., Yadollahi, A., Thompson, S.M., Bian, L., & Shamsaei, N. (2017). Mechanical Properties and Microstructural Characterization of Selective Laser Melted 17-4 PH Stainless Steel. Rapid Prototyping Journal. 23(2), 280-294.

Yadollahi, A., Shamsaei, N., Thompson, S.M., Elwany, A., & Bian, L. (2017). Effects of Building Orientation and Heat Treatment on Fatigue Behavior of Selective Laser Melted 17-4 PH Stainless Steel. International Journal of Fatigue. 94, 218-234.

Yadollahi, A., Simsiriwong, J., Thompson, S.M., & Shamsaei, N. (2016). Data Demonstrating the Effects of Build Orientation and Heat Treatment on Fatigue Behavior of Selective Laser Melted 17-4 PH Stainless Steel. Data in Brief. 7, 89.

Yadollahi, A., Hammi, Y., Shamsaei, N., & Horstemeyer, M. (2016). Quantification of Tensile Damage Evolution in Additive Manufactured Austenitic Stainless Steels. Materials Science and Engineering: A. 657, 399–405.

Thompson, S.M., Bian, L., Shamsaei, N., & Yadollahi, A. (2015). An Overview of Direct Laser Deposition for Additive Manufacturing; Part I: Transport Phenomena, Modeling and Diagnostics. Additive Manufacturing. 8, 36-62.

Shamsaei, N., Yadollahi, A., Bian, L., & Thompson, S.M. (2015). An Overview of Direct Laser Deposition for Additive Manufacturing; Part II: Mechanical Behavior, Process Parameter Optimization and Control. Additive Manufacturing. 8, 12-35.

Yadollahi, A., Shamsaei, N., Thompson, S.M., & Seely, D. W. (2015). Effects of Process Time Interval and Heat Treatment on the Mechanical and Microstructural Properties of Direct Laser Deposited 316L Stainless Steel. Materials Science and Engineering: A. 644, 171–183.

Yadollahi, A., Mahtabi, M. J., Doude, H., & Newman, J., Jr. (2017). Prediction of Fatigue Lives in Additively Manufactured Alloys Based on the Crack-growth Concept. Solid Freeform Fabrication. Austin, Texas.

Yadollahi, A., Shamsaei, N., Thompson, S.M., Elwany, A., Bian, L., & Mahmoudi, M. (2015). Fatigue Behavior of Selective Laser Melted 17-4 PH Stainless Steel. Solid Freeform Fabrication (SFF). Austin, TX.

Yadollahi, A., Shamsaei, N., Thompson, S.M., Elwani, A., & Bian, L. (2015). Mechanical and Microstructural Properties of Selective Laser Melted 17-4 PH Stainless Steel. ASME/ IMECE. Houston, TX.

Yadollahi, A., Shamsaei, N., Thompson, S.M., Bian, L., & Seely, D. W. (2015). Microstructural Features and Mechanical Properties of 316L Stainless Steel Fabricated by Laser Additive Manufacture. 56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials. Kissimmee, FL.